Mount finder


In-Wall Box for the AM100, AM175, and AM300

List $347.00 Color: White

  • Recessed mount for AM100, AM175 and AM300 swingout mount
  • Cable routing through knockouts
  • Frame provides a finished look
  • Integrated PEM-Nut hardware
  • Drop-in power/signal knockouts for easy wiring
  • Mount sold separately

The INW-AM325 In-Wall Box allows for recessed wall mounting of our AM100, AM175 and AM300 Swingout Arms with no mount disassembly required. The mount can be placed directly into the in-wall box. Simply fasten the mount's wall plate to the in-wall box then attach the mount to the wall plate.

Shipping Weight 43.40 lb.| 19.7 kg
Weight Capacity 160 lb.| 72.7 kg
Typical Display Sizes 37.00 in. & up

Display weight & VESA pattern are the most important factors for determining mount compatability

DIM Sizes 29.50 in. (wide) x 6.50 in. (high) x 33.50 in. (deep) | 749 mm x 165 mm x 851 mm
UPC 829973259044
Bid Specification Document 0.01 MB pdf
CAD File 0.18 MB dwg
Dimensional Drawing 0.23 MB pdf
High Resoluton Image 7.59 MB zip
Manual 1.84 MB pdf

Does the INW-AM325 need any wall reinforcement?

The INW-AM325 only needs wall reinforcement if the stud spacing is more than 16 inches. In this case, use commercially available 2" x 4" spacer boards and 3" wood screws as needed.

What are the included wood shims for?

Wood shims help center the unit, as well as provide a tight fit when all the wood screws are tightened down. Use as many shims as it takes to ensure that the in-wall box is level and centered.

Do I need to disassemble the swingout mount to fit it into the INW-AM325?

The in-wall box is designed so that you can place the mount directly in it with no disassembly (just make sure the flat-panel display is not attached). Simply use the Phillips head screws and lock washers provided with the in-wall box to fasten the wall p