Flat-Panel Mounts

Enhanced Tilting Mount for Flat-Panels up to 175 lb.

• Low-profile design with post-installation leveling system
• Quick release tabs allow for easy removal of flat-panel

Video Wall Framing System for Flat-Panels up to 160 lb./72 kg

• “Click-It" locking feature confirms display is secure through an audible noise
• Patent pending, top-adjustable mounting brackets ensure alignment and levelness of displays

Flat Large Matrix Video Wall Mount

• A large matrix video wall mount for permanent installations
• Top-adjustable display mounting brackets for aligning the display in x, y and z plane

Tilting Flat-Panels Mount for Displays up to 175 lb. and Integrated Storage

• Mounts to walls, floor stands, carts and ceiling adapters
• Three vertical height mounting options for carts and stands

Modular Video Wall for 46 inch Flat-Panels

• Layout options in portrait or landscape orientation
• Includes mounting hardware pack

Tilting Mount for Flat-Panels up to 175 lb.

• Mounts to walls, floor stands, carts and ceiling adapters
• Features patented Clevis mounting brackets for 12° of effortless tilt

Dual Arm Swingout Mount for Flat-Panel Displays up to 50 lb./23 kg

• Extends 3.7 - 16.9 in. from the wall
• Quick, three-step installation

Basic Series Articulating Mount for Flat-Panels up to 50 lb.

• Cable management tabs integrated into swingout arm
• Dual arm extends smoothly 16 in. from the wall

Tilting Low-Profile Mount for Flat-Panels up to 175 lb.

• Low-profile design
• Provides 10° of continuous downward tilt

Single stud Tilt and Pivot Mount for Flat-Panel up to 50 lb.

• Radial Glide™ provides smooth continuous tilt, pivot and rotation adjustments
• 360° screen rotation

Dual Arm Swingout Mount for Flat-Panel Displays up to 50 lb./23 kg

• Dual swingout arms extends 3.7 - 16.9 in. from the wall
• Quick, three-step installation

VESA Tilt and Pivot Mount for Flat-Panels

• Radial Glide™ provides smooth roll, pitch and yaw
• Rotates 360°

Basic Series Low Profile Tilt Mount for Flat-Panels up to 175 lb.

• Low profile design holds display 2 in. from the wall
• Integrated lateral shift for easy flat-panel adjustment

Fixed Low-Profile Flat-Panel Mount for Displays up to 50 lb. (22.5 kg)

• Low-profile design
• Square footprint is easily hidden behind flat-panel

Protected Mounting Frame for iPads™ with VESA Mounting Pattern

• Securely frames the iPad™ to prevent unauthorized access to power and volume controls
• Perfect for hospitality, corporate and education environments

Low Profile Mount for Flat-Panels up to 175 lb.

• Rigid, reinforced construction with high quality powder coat finish
• Built-in lateral shift adjustment

Flat-Panel Mount with 1.5 in. NPT adapter

• Compatible with VESA 75 x 75 mm, 100 x 100 mm, 200 x 100 mm and 200 x 200 mm mounting patterns
• Capable of 360° rotation and 15° of tilt for strategic placement of flat-panel

Swingout Mount for Flat-Panel Displays up to 175 lb./80 kg

• For flat-panel displays up to 175 lb.
• Pull out arms extend 3.2 - 16 in. from the wall

Tilting Low-Profile Mount for Flat-Panels up to 130 lb.

• 10° of continuous downward tilt
• Post-installation leveling system

Low-Profile Mount for Flat-Panels up to 175 lb.

• Holds flat-panel less than 1 in. from the wall
• Post-installation leveling system

Flat Mount for Dual-Pole Carts and Stands

• Works with dual-pole carts and stands
• Universal mounting arms adjust along poles

Rotating Mount for Flat-Panels up to 160 lb.

• 360° rotation with lockable settings for portrait or landscape placement
• Works with dual-pole carts and floor stands

Dual Arm Swingout Mount for Flat-Panel Displays up to 80 lb./36 kg

• Extends over 17 in. from the wall
• Universal adapter plate fits patterns up to 600 x 400mm

Swingout Mount for Flat-Panels up to 300 lb./136 kg

• Extends 4 - 26 in. from the wall
• Wide range of movement with 90° of swivel for extra swingout

Tilting Mount for Flat-Panels up to 160 lb.

• Mounts to walls, floor stands, carts and ceiling adapters
• Features patented Clevis technology for effortless tilt

Basic Series Tilt Mount for Flat-Panels up to 50 lb. / 23 kg

• Low profile design holds flat-panel a mere 1.89 in. from the wall
• Slotted mounting holes for easy installation

Fully Enclosed Mounting Frame for iPad™

• Covers all operation buttons for complete security
• Available in chrome, stainless steel, white and black

Display Articulating Arm on 15 inch Tube with Clamp Base

• Mounting head provides 90° of omnidirectional movement
• Key hole mounting slots for faster installations

iPad™ Open Access Wall Mounting Frame

• Open mounting frame gives access to all iPad™ controls and connections
• Rotates 360°

Flat-Panel Mount for Displays up to 50 lb.

• Low-profile design
• Square footprint is easily hidden behind flat-panel

Flat Panel Lift with Floating Lid for Displays up to 180 lb.

• All-steel three hat channeled floorboard
• Two-speed lifter

Single Arm Swingout Mount for Flat-Panels Displays up to 50 lb./23 kg

• Extends 11 in. from the wall
• Radial Glide™ provides 15° of smooth flat-panel adjustment in any direction

Articulating Arm for Two Displays on 28 in. Tube with Clamp Base

• Mounting head provides 90° of omnidirectional movement
• Key hole mounting slots for faster installations

Single Display Articulating Arm

• 90° of omnidirectional movement
• Key hole mounting slots for faster installations

iPad™ Rack Mount with Storage Box

• Installs an iPad™ over 5 RUs of a standard equipment rack
• Mounting cage provides some ventilated storage for media components

Flat-Panel Lift with Hinged Lid for Displays up to 180 lb.

• All-steel three hat channeled floorboard
• Two-speed lifter

Dual Display Arm on 15 in. Tube with Clamp Base

• Mounting head provides 90° of omnidirectional movement
• Key hole mounting slots for faster installations

Dual Multi Monitor Arm

• 90° of omnidirectional movement
• Key hole mounting slots for faster installations

Tabletop Stand for Flat-Panels up to 160 lb.

• Wide base for stable support
• Universal mounting arms adjust along poles, providing adjustable placement of flat-panel

Flat-Panel Lift with Floating Lid for Displays up to 360 lb.

• All-steel three hat channeled floorboard
• Two-speed lifter

Basic Series 26 inch-42 inch HDTV Mount Kit

• Qty. 1 LPFM2637 – Flat mount that fits 26”-42” displays
• Qty. 1 9.8’ HDMI cable

Dual Display Articulating Arms on 28 in. Tube with Clamp Base

• Mounting head provides 90° of omnidirectional movement
• Key hole mounting slots for faster installations

Triple Articulating Multi-Monitor Arm

• 90° of omni-directional movement
• Key hole mounting slots for faster installations

Tabletop Stand for Flat-Panels up to 160 lb. (Black Base)

• Wide base for stable support typically fits displays ranging from 32 - 50 in.
• Universal mounting arms adjust along poles

Flat-Panel Lift with Hinged Lid for Displays up to 360 lb.

• All-steel three hat channeled floorboard
• Two-speed lifter

Basic Series 37 inch-63 inch HDTV Mount Kit

• Qty. 1 LPFM2637 – Flat mount that fits 37 - 63 in. displays
• Qty. 1 9.8 ft. HDMI cable

3 Dual Display Arms on 42" Tube with Clamp Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Dual Monitor Curved Bow Arm

• 90° of omnidirectional movement
• Key hole mounting slots for faster installations

Triple Monitor Curved Bow Arm

• 90° of omni-directional movement
• Key hole mounting slots for faster installations

Ultra-Thin Mount for Flat-Panels up to 68 inch

• Ultra-low-profile design - .37" (9mm) from the wall
• Open design for easy cable and electrical access

Low-Profile Cable Mount for Flat-Panels up to 65 lb.

• Continuous horizontal leveling
• Braided steel cable

Triple Display Arm on 15 in. Tube with Clamp Base

• Mounting head provides 90° of omnidirectional movement
• Key hole mounting slots for faster installations

VPM Mount on 15" Tube with Grommet Base

• 12° of omni-directional movement and 360° rotation
• Through counter base allows cable and power to be routed through a solid surface

Basic Series for Flat-Panels up to 50 lb.

• Low-profile design sits only .47 in. from the wall
• Slotted mounting holes for easy installation

2 Triple Display Arms on 28" Tube with Clamp Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

2 VPM Mounts on 28" Tube with Grommet Base

• 12° of omni-directional movement and 360° rotation
• Through counter base allows cable and power to be routed through a solid surface

Basic Series for Flat Panels up to 125 lb.

• Low-profile design sits .92 in. from the wall
• Includes optional five-degree pre-set tilt adapter

3 Triple Display Arms on 42" Tube with Clamp Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

3 VPM Mounts on 42" Tube with Grommet Base

• 12° of omni-directional movement and 360° rotation
• Through counter base allows cable and power to be routed through a solid surface

Rotating Mount for Flat-Panels up to 160 lb.

• Rotates 360° so display can be locked in any position
• Patented Griplates™ (US Patent number 8,035,757 B2) support flat-panel displays and hold the display tight on the
  mounting brackets

Universal Tilting Mount for Flat-Panels up to 300 lb

• Mounts to walls, floor stands, carts and ceiling adapters
• Patent-pending Griplates™ support flat-panel displays and hold the display tight on its mounting brackets

VPM Mount on 15" Tube with Extrusion Base

• 12° of omni-directional movement and 360° rotation
• Base can be installed on 1.5” on center T slot channel or single T slot channel

Dual Monitor Curved Bow on 15" Tube with Grommet Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Rotating Ceiling Mount for Flat-Panels up to 63 inch

• Flat-panel can rotate from portrait to landscape
• Easy-to-use handle adjusts tilt and may be stored when not in use

Basic Series 50 inch-80 inch Flat Mount

VESA Tilting Mount for Flat-Panels up to 160

• Mounts to walls, floor stands, carts and ceiling adapters
• Ideal for portrait or landscape mounting (display orientation only)

Two VPM Monitor Mounts on 28 in. Tube with Extrusion Base

• 12° of omnidirectional movement and 360° rotation
• Base can be installed on 1.5 in. on center T-slot channel or single T-slot channel

Triple Monitor Curved Bow on 15" Tube with Grommet Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Rotating Ceiling Mount for Flat-Panels up to 40 inch

• Flat-panel can rotate from portrait to landscape
• Easy-to-use handle adjusts tilt and may be stored when not in use

Basic Series Articulating Mount for Flat-Panels up to 50 lb.

• Fits VESA 75 x 75 mm, 100 x 100 mm, 200 x 100 mm and 200 x 200 mm mounting patterns
• Integrated cable management organizes power and signal cables for a clean installation

Back-to-Back Ceiling Mount for Flat-Panels

• Supports two flat-panels back-to-back
• Center support features mounting points to receive J-box for power or A/V (not included)

3 VPMs on 42" Tube with Extrusion Base

• 12° of omni-directional movement and 360° rotation
• Base can be installed on 1.5” on center T slot channel or single T slot channel

2 Dual Monitor Curved Bow on 28" Tube with Grommet Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Quadruple Ceiling Mount for Flat-Panels up to 175 lb.

• Supports four flat-panels in a fixed ring
• Can be suspended from 2 in. NPT pipe

Dual Monitor Curved Bow on 15" Tube with Extrusion Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

2 Triple Curved Mounts Bow on 28" Tube with Grommet Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Rotating Mount for Flat-Panels up to 40 inch

• 360º rotation with lockable settings for portrait or landscape placement
• Integrated tilt-adjustment tool

Basic Series 37 inch-47 inch Swingout Arm

Ceiling Mount for Flat-Panels up to 175 lb.

• Supports a single flat-panel
• Ultra-thin design keeps center of gravity close to flat-panel to reduce deflection

Triple Monitor Curved Bow on 15" Tube with Extrusion Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

3 Dual Monitor Curved Bow on 42" Tube with Grommet Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Suspension Mount for 103 inch Flat-Panel Displays

• 1-2" diameter, aircraft-grade cables can support over 10 tons
• Vertical adjustment rod aids in leveling flat-panel after installation

Triple Ceiling Mount for Flat-Panels

• Supports three flat-panels in a fixed ring
• May be suspended from 2" NPT pipe

2 Dual Monitor Curved Bow on 28" Tube with Extrusion Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

3 Triple Monitor Curved Bow on 42" Tube with Grommet Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Lightweight Floor Stand with 72 in. Dual Poles and Tilting Mount for Flat-Panels up to 175 lb.

• Adjustable flat-panel placement along poles for perfect viewing height
• Cable management inside poles

Basic Series Low Profile Tilt Mount for Flat-Panels up to 130 lb.

• Low-profile design, just 2 in. from the wall
• Ten degrees of continuous tilt

Ceiling Mount for Dual Flat-Panels up to 46 inch

• 15° of tilt facilitates strategic placement of the flat-panel
• Holds two flat-panel displays up to 46" each in portrait or landscape orientation

2 Triple Monitor Curved Bow on 28" Tube with Extrusion Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

3 Dual Monitor Curved Bow on 42" Tube with Extrusion Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Display Articulating Arm on 15 in. Tube with Grommet Base

• Mounting head provides 90° of omnidirectional movement
• Key hole mounting slots for faster installations

Tilting Mount for 85 inch Panasonic Flat Panel

• Unique, lower-rail tilt bracket allows up to 4° of tilt in 2° increments
• Built-in lateral shift allows for flexible placement of flat-panel

Universal Flat Mount for 26 inch-42 inch Flat Panels

Universal Flat Mount for 61 inch+ Flat Panels

3 Triple Monitor Curved Bow on 42" Tube with Extrusion Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

2 Display Articulating Arms on 28" Tube with Grommet Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Tilting Mount for 103 in. Panasonic & Runco Flat-Panel

• Unique, lower-rail tilt bracket allows up to 4° of tilt in 1° increments
• Built-in lateral shift allows for flexible placement of flat-panel

Basic Series Low Profile Tilt Mount for Flat-Panels up to 300 lb.

• Low-profile design holds display just two inches from the wall
• Ten degrees of continuous tilt

Universal Tilt Mount for 26 inch-42 inch Flat Panels

1 Display Articulating Arm on 15" Tube with Extrusion Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Two Display Arm on 15" Tube with Grommet Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Multi-Monitor Mount Additional Arm

VESA Swingout Mount for Flat-Panels

• Ideal mount for interactive touch panels, card swipe, satellite and cable boxes, Apple TV's, small media players or
  mini computers
• Flexible display positioning

2 Display Articulating Arms on 28" Tube with Extrusion Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

2 Dual Display Arms on 28" Tube with Grommet Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Low-Profile Mount for Flat-Panels up to 175 lb.

• Low-profile design is less than two inches in depth
• Built-in lateral shift

Multiple Monitor Ceiling Mount for Flat-Panels

• Fits up to (3) 10"- 20" displays
• Tilt and pivot adjustments available for each display

VESA Swingout Mount for Flat-Panels

• Ideal mount for interactive touch panels, card swipe, satellite and cable boxes, Apple TV's, small media players or
  mini computers
• Flexible display positioning

Dual Display Arm on 15" Tube with Extrusion Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

3 Dual Display Arms on 42" Tube with Grommet Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Swivel Flat-Panel Mount For Carts and Stands

• Works with dual-pole carts and stands
• Arms swivel left to right 15º

Multiple Monitor Table Mount for Flat-Panels

• Fits up to (3) 10"- 20" displays
• Tilt and pivot adjustments available for each display

Low-Profle Mount for Flat-Panels up to 80 inch

• Low-profile - less than 2" in depth
• Built-in lateral shift

2 Dual Display Arms on 28" Tube with Extrusion Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Triple Display Arm on 15" Tube with Grommet Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Ultra-thin Universal Wall Mount

• Ultra-low-profile design - .37" (9mm) from the wall
• Open design for easy cable and electrical access

Multiple Monitor Wall Mount for Flat-Panels

• Fits up to (3) 10"- 20" displays
• Tilt and pivot adjustments available for each display

Indoor and Outdoor Enclosure for Flat-Panels up to 160 lb.

• Can be mounted in portrait or landscape orientation
• Patent-pending ThermaVent™ design allows enclosure to be mounted directly to the wall

3 Dual Display Arms on 42" Tube with Extrusion Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

2 Triple Display Arms on 28" Tube with Grommet Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Tilt Mount for Flat-Panel Displays up to 125 lb.

• A simple lift-and-hook design for easy installation
• Built-in lateral shift for post-installation screen adjustments

Outdoor Enclosure for Flat-Panels up to 160 lb.

• Can be mounted in portrait or landscape orientation
• Patent-pending ThermaVent design allows enclosure to be mounted directly to the wall

Triple Display Arm on 15" Tube with Extrusion Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

3 Triple Display Arms on 42" Tube with Grommet Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Low-Profile Ultra-Slim Swingout Mount for Flat-Panels up to 100 lb.

• Low profile, ultra thin swing-out flat-panel mount
• Collapses to just 1.5 in. deep

Low-Profile Mount for Flat-Panels up to 130 lb.

• Low-profile design
• Post-installation leveling system

In-wall A/V and Power GearBox™

• Easy Installation and placement
• Can install in drywall - No need for dedicated pre-construction stud placement

2 Triple Display Arms on 28" Tube with Extrusion Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

1 VPM Mount on 15" Tube with Clamp Base

• 12° of omni-directional movement and 360° rotation
• Clamp base is the perfect fit for almost every surface

Storage Mount for Flat-Panels up to 36 inch

• Mounts to walls, floor stands, carts and ceiling adapters
• Built-in lateral shift

3 Triple Display Arms on 42" Tube with Extrusion Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

2 VPM Mounts on 28" Tube with Clamp Base

• 12° of omni-directional movement and 360° rotation
• Clamp base is the perfect fit for almost every surface

Low-Profile Tilting Portrait Mount for Flat-Panels up to 175 lb.

• Holds flat-panel in portrait orientation 2 in. from the wall
• 8º of continuous downward tilt

Christie Microtile™ Mounting System

• Floating wall brackets create flat and plumb surface to align tiles properly
• Various sized wall brackets are available to configure the array to the desired size

3 VPM Mounts on 42" Tube with Clamp Base

• 12° of omni-directional movement and 360° rotation
• Clamp base is the perfect fit for almost every surface

Low-Profile Flat Portrait Mount for Flat-Panels up to 175 lb.

• Holds flat-panel in portrait orientation less than one inch from the wall
• Post-installation leveling system

VESA GearBox Tilting Mount for Flat-Panels up to 50 lb.

• Works with VESA patterns up to 400 x 200mm
• Provides 8° degrees of tilt

Adjustable Height Swingout Mount for Small Flat-Panels

• 90° of omnidirectional movement
• Key hole mounting slots for faster installations

Dual Monitor Curved Bow on 15" Tube with Clamp Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Low-Profile Mount for Flat-Panels up to 300 lb.

• Holds flat-panel in portrait orientation less than 1 in. from the wall
• Post-installation leveling system

Tilting Low-Profile Mount for Flat-Panels up to 300 lb.

• Holds flat-panel in portrait orientation less than 2" from the wall
• Post-installation leveling system

Extending Scissor Mount for Flat-Panels up to 225 lb.

• Extends 20 in. straight out from the wall
• Includes P4263F fixed mount

Triple Monior Curved Bow on 15" Tube with Clamp Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Secure iPad™ Mounting Frame with Access to Home Button

• Secure frame encloses entire iPad™, but allows access to the home button
• Ventilation openings for airflow are located on the top and bottom of the mount

Tilting Flat-Panels Mount for Displays up to 175 lb.

• Open design for easy cable and electrical access
• Side covers aid with wall plate installation while also concealing cables

Fully Protected VESA Mounting Frame for iPADs

• Frame blocks all button access leaving only the touch screen open for use.
• Opening allows for docking cable

Extending Scissor Mount with Tilt for Flat-Panels up to 225 lb.

• Extends 21 in. straight out from the wall
• Includes P4263T mount, providing 10º of downward tilt

2 Dual Monitor Curved Bow on 28" Tube with Clamp Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Secure iPad™ Mounting Frame with Camera Access

• Secure frame covers operation buttons, but allows access to the camera
• Ventilation openings for airflow are located on the top and bottom of the mount

Tilting wall mount fits 55 inch-63 inch displays

Mounting Frame for iPads with VESA Mounting Pattern

• Open mounting frame gives access to all iPad™ controls and connections
• Attaches to any VESA 100x100 mounting plate or swingout mount

Swingout Mount for Flat-Panels up to 300 lb./136 kg

• Extends 4 - 26 in. from the wall
• Wide range of movement with 90° of swivel for extra swingout

2 Triple Curved Mounts Bow on 28" Tube with Clamp Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Secure iPad™ Mounting Frame with Access to Home Button and Camera

• Secure frame encloses entire iPad™, but allows access to the camera and home button
• Ventilation openings for airflow are located on the top and bottom of the mount

Adjustable-Height Mount for Flat-Panels up to 50 lb. (22.5 kg)

• Compatible with VESA 75 x 75 mm, 100 x 100 mm, 200 x 100 mm and 200 x 200 mm mounting patterns
• Adjust from 33 - 50 in. for perfect placement and viewing

Adjustable Mobile Stand for iPad™

• Free standing reversible iPad™ stand
• Easy to attach and detach the device

3 Dual Monitor Curved Bow on 42" Tube with Clamp Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

Tilting Flat-Panel Cable Mount

• Vesa compatible up to 600 x 400 mm
• Mount plate is easily installed with the patented MagnaGuide™ feature

iPad Tabletop Stand and Wall Mount

• Open design gives access to all iPad controls and connections
• Mount rotates 360° on stand

3 Triple Monitor Curved Bow on 42" Tube with Clamp Base

• Mounting head provides 90° of omni-directional movement
• Key hole mounting slots for faster installations

VESA Tilting Mount for Flat-Panels up to 40 inch

• Easy, single-stud installation
• 12° of continuous tilt