False Ceiling FTP Projector Mount Bundle

List $384.00 Color: White

  • Lock-It™ security hardware and leveling barrel provides added protection
  • Hole-cutting escutcheon ring
  • Includes 100 ft. of braided cables with looped ends and quick locks
  • Adapter plate sits hidden above the ceiling tile within the T-bar frame
  • Projector includes universal mounting legs (four long pre-installed, two short) with post-installation leveling barrels
  • Includes quick installation disk for direct ceiling installation
  • Innovative patent-pending mechanism enables smooth finger-tip alignment (no tools required)
  • Includes   FTPW   PP-FCTA-QL   PWH-4W  

The FTP-FCTA4W-QL combines the FTPW, universal fine-tune mount for projectors up to 65 lb., with a PP-FTCA-QL, a false ceiling adapter with quick-lock cable. It also includes a four inch pipe (PWH-4W) with a cable routing outlet. The FTPW’s enhanced fine-tune features allow the installer to adjust pitch, roll and yaw independently and without tools. After aligning the projectors image to the final projection settings, the FTPW can be locked in position with a knurl knob. The PP-FCTA-QL allows precise projector placement while hidden above ceiling tiles within the T-bar frame. The FTP-FCTA4W-QL was designed to integrate with a new or existing suspended ceiling structure.

Shipping Weight 17.00 lb.| 7.7 kg
Weight Capacity per Mount 50 lb.| 22.7 kg
Number of Mounts 0
Height 4.05 in.| 103 mm
Mounting Reach 16.43 in.| 417 mm
Pivot +5.00° / -15.00°
Pitch +5.00° / -15.00°
Roll +5.00° / -5.00°
Yaw +20.00° / -20.00°
DIM Sizes 12.00 in. (wide) x 12.00 in. (high) x 28.00 in. (deep) | 305 mm x 305 mm x 711 mm
UPC 829973823832
Bid Specification Document 0.01 MB pdf
High Resoluton Image 0.21 MB jpg
Manual 6.09 MB pdf

Will I need to readjust the image every time I take down the projector for service?

Thanks to the quick-release design and rigid installation hardware, you can easily disengage the lower half of the mount while keeping all tilt, roll and yaw settings in position.

How many screws do I need to tighten to lock this projector mount in position?

Unlike some competitive models, you only need to tighten a single locking screw.

What can I fasten the PP-FCTA-QL to?

Use the Quick-lock Cable Kit to fasten the adapter to a wood stud ceiling, concrete ceiling or ceiling truss. Concrete ceiling installations also require concrete eye anchor bolts (not included).