Tilt +10.00°

3x1 Christie® MicroTiles® Mounting Bracket

• Floating wall brackets create flat and plumb surface to align tiles properly
• Various sized wall brackets are available to configure the array to the desired size

In-Wall Box for the AM100 Flat-Panel Mount

• The INW-AM100 installs with the AM100 ultra-slim swingout mount for recessed storage area for
  cables, power sources, and other AV or IT equipment
• Nesting for cable and power sources

6x6 MicroTiles® Wall Unit

• Floating wall brackets create flat and plumb surface to align tiles properly
• Various sized wall brackets are available to configure the array to the desired size

Low-Profile Ultra-Slim Swingout Mount for Flat-Panels up to 100 lb./45.5 kg

• Low profile, ultra thin swing-out flat-panel mount
• Collapses to just 1.5 in. deep

3x3 Mobile Video Wall Cart

• Easy mobility with heavy-duty designed casters to support equipment weight for swift maneuvering
• Stable base provides solid support for the configuration as well as equipment storage and protection

Mobile Mega Mount Cart for Displays 103" and Up

• Solid bottom skirt and tray to store and protect A/V or IT equipment
• Heavy-duty casters allow for swift and precise maneuvering

Video Wall Framing System for Flat-Panels up to 160 lb./72 kg

• Shared component parts across product line reduces cost and training time and optimizes labor
  efficiency
• Patent pending, top-adjustable mounting brackets ensure alignment and levelness of displays

Heavy-Duty Clamp Adapter and Flat-Panel Mount

• Displays can be mounted to adapter before or after it is attached
• 4.5 in. bolt pattern

Unistrut Adapter

• Cables can be routed through the pipe and out the top of adapter
• Slides on U-Channel for precise adjustment

Low-Profile Cable Mount for Flat-Panels up to 65 lb./29 kg

• Continuous horizontal leveling
• Braided steel cable

Cheeseboro Adapter with 2 inch Coupler Fitting

• Attaches to any mount with an 2" NPT threaded mating point
• Works with 2" tube truss

Elliptical Floor Stand with Two Side-by-Side Flat-Panel Mounts

• Adjust the display placement to preferred viewing height
• Route power through or between poles with built-in cable management

Cheeseboro Adapter with 1.5 inch Coupler Fitting

• Attaches to any mount with an 1 .5" NPT threaded mating point
• Works with 2" tube truss

Mobile Mega Mount Cart for Displays 65" to 80"

• Solid bottom skirt and tray to store and protect A/V or IT equipment
• Heavy-duty casters allow for swift and precise maneuvering

Mobile Mega Mount Cart for Displays 82" to 90"

• Solid bottom skirt and tray to store and protect A/V or IT equipment
• Heavy-duty casters allow for swift and precise maneuvering

2X2 Mobile Video Wall Cart

• Accommodates displays from 40" up to 60"
• Stable base ensures solid support and equipment protection

Suspension Mount for 103 in. Flat-Panel Displays

• 1-2" diameter, aircraft-grade cables can support over 10 tons
• Vertical adjustment rod aids in leveling flat-panel after installation

Model-Specific Fine Tune Projector Mount

• Innovative patent-pending mechanism enables smooth finger-tip alignment (no tools required)
• Dedicated mounting plate

1x3 Modular Video Wall Stand for 46 in. and 55 in. Displays

• Includes unique adjustment bolts to assure stand remains level.
• Patent pending, top-adjustable brackets ensure displays are aligned and level.

Universal Projector Mount with False Ceiling Adapter

• Projector mount features cable routing inside pipe
• Gyrolock™ quick installation connector

Video-Conference Camera Shelf for Dual-Pole Carts

• 12 x 15 in. shelf holds up to 25 lb.
• Works with any dual-pole cart and stand

Dual Pole Floor Stand with Back-to-Back Adapter and Two Tilting Mounts

• Carries two flat-panels back-to-back on CTM-MS2 mounts
• Cable management inside poles

Modular Three-By-Three Video Wall Stand for 46 in. Thin Bezel Flat-Panels

• Completely breaks down for easier shipping, handling, and setups.
• Patent pending, top-adjustable display mounting brackets ensure display alignment and levelness
  along the x, y and z axis.

Modular Two-By-Two Video Wall Stand for 46 in. and 55 in. Thin Bezel Flat-Panel

• Completely breaks down for easier shipping, handling, and moving.
• Patent pending, top-adjustable display mounting brackets ensure displays are aligned and level.

Modular Three-by-Three Video Wall Stand for 55 in. Thin Bezel Flat-Panel

• Completely breaks down for easier shipping, handling, and setups.
• Patent pending, top-adjustable display mounting brackets ensure display alignment and levelness
  along the x, y and z axis.

Vaulted Ceiling Adapter

• Mounts to wood stud or solid structure
• Includes set screw for added safety

Modular Video Wall for 46 inch Flat-Panels

• Layout options in portrait or landscape orientation
• Includes mounting hardware pack

Shelf for Dual Pole Carts and Stands

• Adapts to dual pole carts and stands
• Easy to install and adjust

Basic Series Low Profile Tilt Mount for Flat-Panels up to 175 lb.

• Low profile design holds display 2 in. from the wall
• Integrated lateral shift for easy flat-panel adjustment

Universal Projector Mount and False Ceiling Adapter

• Patented MagnaGuide™ reduces installation time and aids in projector alignment (U.S. Patent No.
  7,758,001 B2)
• Radial Glide™ provides smooth roll, pitch and yaw

Protected Mounting Frame for iPads™ with VESA Mounting Pattern

• Securely frames the iPad™ to prevent unauthorized access to power and volume controls
• Perfect for hospitality, corporate and education environments

12 in. Black Pre-Cut NPT with Cable Outlet

• A pre-cut pipe with cable routing outlet that connects to any 1.5 in. NPT pipe adapter
• Durable powder-coated aluminum pipe

VESA GearBox™ Tilting Mount for Flat-Panels up to 50 lb./23 kg

• Works with VESA patterns up to 400 x 200mm
• Provides 8° degrees of tilt

1.5 in. Threaded Pipe Nipple

• Connects with 1.5 in. NPT pipe coupler
• Unpainted threaded pipe adapter

1.5 inch Pipe-to-Pipe Coupler

Wood Joist Reinforcement Adapter

• Adjustable level-joist adapter plates allow cross-bolting through wood joists
• Use to mount TV ceiling mounts or projector mounts to wooden joists

Extra Large Ceiling Adapter with 2" NTP Coupler

• Adapter plate has 2 in. threaded coupling for NPT pipe
• 360 degree rotation for optimal viewing position

Support Collar for PSP Series Floor Stands

• Allows poles to be cut in half for easier transport
• Holds the two pole pieces when reattaching for use

Floor Stand with 72 in. Chrome Poles and Back-To-Back Flat-Panel Mount Adapter

• Mount two (or more) flat-panels back-to-back
• Adjustable flat-panel placement along poles for perfect viewing height

Floor Stand with 84 in. Chrome Poles and Back-To-Back Flat-Panel Mount Adapter

• Mount two (or more) flat-panels back-to-back
• Adjustable flat-panel placement along poles for perfect viewing height

Floor Stand with 84 in. Black Poles and Back-To-Back Flat-Panel Mount Adapter

• Mount two (or more) flat-panels back-to-back
• Adjustable flat-panel placement along poles for perfect viewing height

Floor Stand with 72 in. Dual Poles and Universal Flat Mount for Flat-Panels up to 160 lb./73 kg

• Cable management inside poles
• Universal flat-panel mount fits a wide range of displays from 37 in. and above

Steel Cable Locking System

Back-to-back-display Adapter with 2 inch Swivel Couple

• Allows you to suspend two CTM series mounts back-to-back
• Adapts to 2" NPT

Back-to-back Adapter for CS Series Floor Stands

ECM Series Adapter - For Mac mini™

• Attaches directly to any ECM mount or wall
• Cradles the new Mac mini™ behind display

Set of 60 in. Black Replacement Poles

• Includes two 60 in. (1524mm) black poles
• Both poles serve as a conduit for cabling

Set of 72 in. Black Replacement Poles

• Includes two 72 in. (1828.8mm) black poles
• Both poles serve as a conduit for cabling

Set of 84 in. Black Replacement Poles

• Includes two 84 in. (2133.6mm) black poles
• Both poles serve as a conduit for cabling

60 in. Single Black Replacement Pole

• Includes one 60 in. black pole
• Serves as a conduit for cabling

72 in. Single Replacement Chrome Pole

• Includes one 72 in. chrome pole
• Serves as a conduit for cabling

72 in. Single Replacement Black Pole

• Includes one 72 in. black pole
• Serves as a conduit for cabling

84 in. Single Replacement Chrome Pole

• Includes one 84 in. chrome pole
• Serves as a conduit for cabling

84 in. Single Replacement Black Pole

• Includes one 84 in. black pole
• Serves as a conduit for cabling

Low-Profile Single-Pole Floor Stand with 60 in. Chrome Pole

• Low-profile base (0.25 in.) can easily slide under carpet for a seamless look
• Adjustable flat-panel placement along pole for perfect viewing height

Low-Profile Single-Pole Floor Stand with 72 in. Black Pole

• Low-profile base (0.25 in.) can easily slide under carpet for a seamless look
• Adjustable flat-panel placement along pole for perfect viewing height

Low-Profile Single-Pole Floor Stand with 84 in. Chrome Pole

• Low-profile base (0.25 in.) can easily slide under carpet for a seamless look
• Adjustable flat-panel placement along pole for perfect viewing height

PBM mount

Swivel Adapter with 15 inch Coupler-to-Coupler NPT Fittings

• Upper and lower locations secured by 8-point, hard-steel bolt and self-locking nut
• Holds up to 275 lbs

Remote with height-control module for L180F L180H L360F and L360H

• Remote with height-control module
• Works with L180F L180H L360F and L360H

Swivel Adapter with 2 inch Coupler-to-Coupler Fittings

Swivel Adapter with 2 inch Pipe-to-Coupler Fittings

1 inch Truss Ceiling Adapter

1.5 inch Truss Ceiling Adapter

.5 inch Truss Ceiling Adapter

2 inch Truss Ceiling Adapter

.75 inch Truss Ceiling Adapter

10 inch-16 inch I-Beam Adapter with 1.5 inch Coupler

10 inch-16 inch I-Beam Adapter with 2 inch Coupler

• Fits I-Beams and tube-trusses between 10 inch-16 inch
• Ideal for rental & staging installations

10 inch-16 inch I-Beam Adapter with 1.5 inch Pipe Nipple

10 inch-16 inch I-Beam Adapter with 2 inch Pipe Nipple

4 inch-8 inch I-Beam Adapter with 2 inch Coupler

4 inch-8 inch I-Beam Adapter with 1.5 inch Pipe Nipple

• Includes 1.5 inch threaded pipe nipple with cable outlet
• Supports up to 175 pounds

4 inch-8 inch I-Beam Adapter with 2 inch Pipe Nipple

• Includes a 2 inch threaded pipe nipple with cable outlet
• Supports up to 350 pounds

C-Clamp with 1.5 inch Pipe Nipple

• Quickly mounts to a pipe or truss securely.
• Used it rental & staging and other pro AV installations to pipe or truss

C-Clamp with 2 inch Pipe Nipple

• Quickly mounts to a pipe or truss securely.
• Used it rental & staging and other pro AV installations to pipe or truss

Adjustable-Height Pipe Adapter with 1.5 in. NPT Pipe

• Adjusts from 24 - 46 in. (610-1184mm) in 1.25 in. increments on a 1.5 in. NPT pipe
• Adapts to mounts with 1.5 in. NPT coupler

Magnetic Cover Pack for Carts and Stands

• Heavy-duty magnets hold the cover packs firmly in place
• Durable, black powder coat finish

Dual Stacker For Smaller Projectors

• Allows maximum ventilation
• Mounts to the ceiling or 1.5" NPT (requires PVCPLR, sold separately)

PBM mount

Dual-Cable Security Device for Projector Mounts

• Unique design protects mounting points on the chassis as well as two mounting points at the ceiling
  or wall
• Dual-cable security device offers customers added safety and security

Rack Mount for Monitors and Flat-Panel Displays

• Fits all standard equipment rack
• Two standard VESA patterns 75 x 75mm and 100 x 100mm

PBM mount

PBM mount

Navitar Lens Adapter for PBL/PBC Series Projector

Casters for Mobile Carts

• Four Casters - two locking and two non-locking
• Adaptable to Avecta and EB Stands

Multi-Monitor Mount Additional Arm

16 inch Steel Braided Security Cables for PP-SEC

• Additional security feature for installations
• Aircraft grade cables ensure secured support

Tilting wall mount fits 55 inch-63 inch displays

• Open design for easy cable and electrical access
• Features patented Clevis mounting brackets for effortless tilt

VESA Adapter Plate - For JVC LCD

VESA Adapter Plate - For Akai LCD

VESA Adapter Plate - For Panasonic LCD

VESA Adapter Plate - For Sony LCD

Cables are routed through steel chassis sleeves -

Universal Projector Mount with False Ceiling Adapter

• Projector mount features cable routing inside pipe
• Gyrolock™ quick installation connector

Universal Projector Mount with Large Extension Column

• Ceiling plate mounts to a single stud or 4.5 in. bolt pattern
• Cable routing inside pipe

Universal Projector Mount with up to 47 in. extension

• Mounting plate installs on a single stud or a false ceiling adapter
• Can be mounted vertically or horizontally to walls, vaulted or traditional ceilings

Mobile Nesting Cart with 60 in. Chrome Poles

• Nesting base design is ideal for tight storage spaces
• Designed to easily roll through standard doorways

Ceiling Adapter for RTM Series

Universal Projector Mount with Extension Column

• Ceiling plate mounts to a single stud or 4.5 in. bolt pattern
• Cable routing inside pipe

Universal Projector Mount with Large Extension Column

• Integrated coupler on MAG-PRO attaches to standard 1.5 in. NPT and features cable routing port
• Patented MagnaGuide™ reduces installation time and aids in projector alignment (U.S. Patent No.
  7,758,001 B2)

PBM Series Projector Mount

• Designed to hold projector up to 200 lb.
• Model specific mount designed for Sanyo PLC-XF7, Christie LW600 an many other heavy weight
  projectors

16 inch Steel Braided Security Cables for PP-SEC

18 inch Right-Angle Power Cord

• 18 in. low-profile, right angle power cord
• For flat-panel and projector installations

Projector Mount and T-bar Adapter with Quick Lock Cable

• Patented MagnaGuide™ reduces installation time and aids in projector alignment (U.S. Patent No.
  7,758,001 B2)
• Radial Glide™ provides smooth roll, pitch and yaw

Projector Mount and Full Tile False Ceiling Adapter with Quick Lock Cables

• Patented MagnaGuide™ on the MAG-PRO reduces installation time and aids in projector alignment
  (U.S. Patent No. 7,758,001 B2)
• Radial Glide™ provides smooth roll, pitch and yaw

Projector Mount with False Ceiling Adapter and Quick Lock Cable

• Projector mount features cable routing inside pipe
• Gyrolock™ quick installation connector

Quick Locking Cable System

• Includes 100 ft. of braided cables with looped ends and quick locks
• Adapts to wood stud, concrete stud or truss ceilings

Pipe-mounted Equipment Enclosure

• Mounts to end of 1.5" NPT pipe on top and bottom
• Storage box for above false ceilings

2 inch Escutcheon Ring with Built-in Hole Cutter

• Creates 1.5" and 2" holes in ceiling tiles
• Cutting device attaches to standard drill

Ceiling Adapter with 2 inch Welded Coupler

• Adapter plate with 2 in. threaded coupling for NPT pipe
• Slotted pipe coupling for safely routing signal cable through pipe interior

Short-Throw Projector Wall Mount with Extension Pole

• Extends 67 in. from wall
• Includes patent-pending GearBox™ for amplifier PC, Mac mini™ or control modules

Lightweight Dual-Pole Floor Stand with 84 in. Chrome Poles

• Lightweight reinforced design
• Ergonomic transport handles

Lightweight Dual-Pole Floor Stand with 60 in. Black Poles

• Lightweight reinforced design
• Ergonomic transport handles

Lightweight Dual-Pole Floor Stand with 72 in. Black Poles

• Lightweight reinforced design
• Ergonomic transport handles

Lightweight Dual-Pole Floor Stand with 84 in. Black Poles

• Lightweight reinforced design
• Ergonomic transport handles

VESA Swingout Mount for Flat-Panels

• Ideal mount for interactive touch panels, card swipe, satellite and cable boxes, Apple TV's, small
  media players or mini computers
• Flexible display positioning

Basic Series Low Profile Tilt Mount for Flat-Panels up to 130 lb.

• Low-profile design, just 2 in. from the wall
• Ten degrees of continuous tilt

6 x 6 in. Ceiling Adapter with 1.5 in. NPT Welded Coupler

• 6 x 6 in. ceiling footprint
• Includes a locking screw for added safety and security

Basic Series Low Profile Tilt Mount for Flat-Panels up to 300 lb.

• Low-profile design holds display just two inches from the wall
• Ten degrees of continuous tilt

Adapter Wings for AM300

• Includes a set of four adapters to be attached to the standard mounting arms
• Allows the expansion to larger mounting patterns

Lightweight Cover Pack for Carts & Stands

• Kit includes three of each 6", 12", and 16" cable covers
• 6" covers designed with cable access holes for easy cable management

Extending Scissor Mount for Flat-Panels up to 225 lb./102 kg

• Extends 20 in. straight out from the wall
• Includes P4263F fixed mount

Fan for in-wall system

• Mates with our GB-ENCL enclosures for flat-panel displays
• Provides additional ventilation to keep the display at ambient temperatures

Dual Stacker For Large Projectors

• Accommodates two large projectors up to 30" wide
• Connect multiple cages on all four sides

A/V Shelving System for P-Series Mounts

• A/V shelving system for P-Series
• Each shelf is adjustable in 10 increments of 1.3 in.

Dual-Pole Brochure Holder for Carts and Stands

• Measures 8" x 9" x 2"
• Can hold roughly 500 single-page brochures or cut sheets

Floor Stand Base with Back-To-Back Flat-Panel Mount Adapter

• Allows flat-panels to be mounted back-to-back anywhere along dual-poles
• Works with T60, T72 and T84 poles (not included)

Elliptical Cart Base with PSD-SPA Mount Adapter

• Elliptical floor stand complete with one dual display adapter (PSD-SPA)
• Caster set of four (4) with two (2) locking and two (2) non-locking

Mobile Cart with 60 in. Dual Poles and Tilting Mount for Flat-Panels up to 175 lb.

• Adjustable flat-panel placement along poles for perfect viewing height
• Includes two locking and two non-locking, heavy-duty casters

Mobile Cart with 72 in. Dual Poles and Tilting Mount for Flat-Panels up to 175 lb.

• Adjustable flat-panel placement along poles for perfect viewing height
• Built-in cable management for organization and prevention of cable pinching

Mobile Cart with 72 in. Dual Poles and Fixed Universal Mounting Arms for Flat-Panels up to 160 lb.

• Variable display adjustment for preferred viewing height
• Two (2) locking and non-locking casters for added stability

Floor Stand with 84 in. Dual Poles and Tilting Mount for Flat-Panels up to 175 lb.

• CTM-MS2 flat-panel mount ensures secure mounting with locking screws and knurl knobs
• Flat-panel mount also includes multiple height settings for flexible placement

Floor Stand with 84 in. Dual Poles and Rotating Mount for Flat-Panels up to 160 lb.

• Rotating mount is easily adjusted by loosening the screws to raise or lower the mount
• Built-in cable management inside poles for an organized appearance

Bundle - FTP w/ PP-FCMA

• The full-tile false ceiling adapter bundle with FTP, fine tune projector mount
• Fits in the space of a standard 24 x 24 in. ceiling tile.

Bundle - FTP w/ PP-FCMA-QL (Quick lock cable)

Bundle - FTP w/ PP-FCTA

Bundle - FTP w/ PP-FCTA-QL (Quick lock cable)

60 in. Single Chrome Replacement Pole Cut in Half

• Includes one 60 in. chrome pole cut in half (two 30 in. poles)
• Serves as a conduit for cabling

72 in. Single Replacement Chrome Pole Cut in Half

• Includes one 72 in. chrome pole cut in half (32in./914.4mm)
• Serves as a conduit for cabling

84 in. Single Replacement Chrome Pole Cut in Half

• Includes one 84 in. chrome pole cut in half (42in./1066.8mm)
• Serves as a conduit for cabling

Bundle - SPI-PRO w/ PP-FCMA

Bundle - SPI-PRO w/ PP-FCMA-QL (Quick lock cable)

Bundle - SPI-PROW w/ PP-FCMA

Bundle - SPI-PRO w/ PP-FCTA

Bundle - SPI-PRO w/ PP-FCTA-QL (Quick lock cable)

Bundle - SPI-PROW w/ PP-FCTA

Bundle - SPI-PROW w/ PP-FCTA-QL (Quick lock cable)

Set of 60 in. Black Replacement Poles Cut in Half

• Includes two 60 in. (1524 mm) black poles cut into 30 in. (762 mm) halves
• Both poles serve as a conduit for cabling

Set of 72 in. Black Replacement Poles Cut in Half

• Includes two 72 in. (1828.8 mm) black poles cut into 30 in. (914.4 mm) halves
• Both poles serve as a conduit for cabling

Set of 84 in. Black Replacement Poles Cut in Half

• Includes two 84 in. (2133.6 mm) black poles cut into 42 in. (1066.8mm) halves
• Both poles serve as a conduit for cabling

Lightweight Floor Stand with 84 in. Dual Poles and Fixed Universal Mounting Arms for Flat-Panels up to 160 lb.

• Adjustable flat-panel placement along poles for perfect viewing height
• Base features ergonomic transport handles

Low-Profile Dual-Pole Floor Stand with PSD-SPA Mount Adapter

• Low-profile base (0.53 in.) can easily slide under a carpet for a seamless look
• Base plate can be bolted to the floor

Dedicated PBM Series Projector Mount

1.5 in. NPT Adjustable-Height Pipe Adapter

• Adjusts from 13 - 21 in. (330-533mm) in 1.25 in. increments on a 1.5 in. threaded pipe
• Works with flat-panel mounts and projector mounts

Cable-Conduit Pipe Cover

• Fits 1 ½" and 2" NPT, 2" tubing, 1"x1" square tubing, and Premier elliptical tubing
• Kit includes four 12" sections and two 2" sections

Fully Enclosed Mounting Frame for iPad™

• Covers all operation buttons for complete security
• Available in chrome, stainless steel, white and black

Mobile Cart with 60 in. Dual Poles and Fixed Universal Mounting Arms

• Includes two locking and two non-locking, heavy-duty casters
• Cable management inside poles

Wall Equipment Gearbox™ with Audio Kit

• Integrated energy-efficient 50 watt compact power amplifier
• Acoustically balanced two-way speaker system includes two speakers, each with a 5.25 in. woofer and
  directional one inch tweeter

Heavy-Duty Projector Mount for Projectors up to 350 lb.

• 360 degree yaw when attached to a 1.5 NPT pipe
• Model-specific mounting plates for projectors over 75 lb.

Small Equipment Storage GearBox™

• Designed to fit the Mac mini™, mini PCs and other small media components with 8 x 8 x 2.63 in. of
  space
• Removable locking lid

Large Equipment Storage GearBox™

• Storage space of 17.88 x 13.71 x 5.35 in.
• Integrated rack rails 3RUs high

Small Equipment Storage GearBox™ for Dual Pole Carts and Stands

• Designed to fit the Mac mini™, mini PCs and other small media components with 8 x 8 x 2.63 in. of
  space
• Removable locking lid

Secure iPad™ Mounting Frame with Camera Access

• Secure frame covers operation buttons, but allows access to the camera
• Ventilation openings for airflow are located on the top and bottom of the mount

False Ceiling FTP projector mount bundle

• Lock-It™ security hardware and leveling barrel provides added protection
• Hole-cutting escutcheon ring

15" Single Pole W/ Clamp Base

• Perfect fit on almost every surface
• 15" pole for multimonitor installations

28" Single Pole W/ Clamp Base

• Perfect fit on almost every surface
• 28" pole for multimonitor installations

42" Single Pole W/ Clamp for Base

• Perfect fit on almost every surface
• 42" pole for multimonitor installations

28" Single Pole W/ Grommet Base

• Through counter base allows cable and power to be routed through a solid surface
• 28" pole for multimonitor installations

42" Single Pole W/ Grommet Base

• Through counter base allows cable and power to be routed through a solid surface
• 42" pole for multimonitor installations

15" Single Pole For Extrusion Base

• Can be installed on 1.5” on center T slot channel or single T slot channel
• 15" pole for multimonitor installations

28" Single Pole For Extrusion Base

• Can be installed on 1.5” on center T slot channel or single T slot channel
• 28" pole for multimonitor installations

42" Single Pole For Extrusion Base

• Can be installed on 1.5” on center T slot channel or single T slot channel
• 42" pole for multimonitor installations

European Universal Adapter Plate for Flat-Panels - 600mm x 400mm

• Universal adapter plate provides 600x400mm VESA mounting pattern
• Hardware pack includes exclusive universal spacers

European Universal Adapter Plate for Flat-Panels - 600mm x 400mm

• Universal adapter plate provides 600x400mm VESA mounting pattern
• Hardware pack includes exclusive universal spacers

6 in. Black Pre-Cut NPT with Cable Outlet

• A pre-cut pipe with cable routing outlet that connects to any 1.5 in. NPT pipe adapter
• Durable powder-coated aluminum pipe

SpiroLock Low-Profile Projector Mount

• Adjustable pitch upper plate is ideal for vaulted ceilings
• Two-piece mount allows separate ceiling and projector installation, then twists and locks together

SpiroLock Projector Mount w/ 15 inch Extension

• Fits projectors up to 45 lbs.
• Adjustable 11"-15" tubular extension

Outdoor Enclosure for Flat-Panels up to 160 lb.

• Can be mounted in portrait or landscape orientation
• Patent-pending ThermaVent design allows enclosure to be mounted directly to the wall

Mobile Cart with 72 in. Dual Poles and Tilting Mount for Flat-Panels up to 175 lb.

• Built-in lateral shift for horizontal adjustment of flat-panels
• Locking and non-locking casters for increased stability

Mobile Cart with 72 in. Dual Poles and Rotating Mount for Flat-Panels up to 160 lb.

• Integrated tilt of 35° upward and 10° downward for flat-panel adjustment
• 360° rotation for portrait or landscape placement with lockable setting

Floor Stand with 60 in. Dual Poles and Fixed Universal Mounting Arms for Flat-Panels up to 160 lb.

• UFA universal mounting arms adjust along poles
• Cable management inside poles

Floor Stand with 72 in. Dual Poles and Rotating Mount for Flat-Panels up to 160 lb.

• Flat-panel mounting arms allow for 35° of upward tilt and 10° of downward tilt
• Built-in cable management inside poles

Extending Scissor Mount with Tilt for Flat-Panels up to 225 lb./102 kg

• Extends 21 in. straight out from the wall
• Includes P4263T mount, providing 10º of downward tilt

Dual Stud Wall Plate

• Add to EST100 to mount to dual studs
• Wall plate mounts to 12 or 16 in. dual studs

Single-Pole Brochure Holder for Carts and Stands

• Measures 8" x 9" x 2"
• Can hold up to 500 single-page brochures or cut sheets

Video Conference Shelf for P-Series

• Includes 3 in. video-conferencing camera mounting slot
• Adjustable in 10 increments of 1.3 in.

1 VPM Mount on 15" Tube with Clamp Base

• 12° of omni-directional movement and 360° rotation
• Clamp base is the perfect fit for almost every surface

2 VPM Mounts on 28" Tube with Clamp Base

• 12° of omni-directional movement and 360° rotation
• Clamp base is the perfect fit for almost every surface

3 VPM Mounts on 42" Tube with Clamp Base

• 12° of omni-directional movement and 360° rotation
• Clamp base is the perfect fit for almost every surface

Ceiling Adapter with 1.5 in. Coupler with Cable Access Hole

• 6 x 6 in. ceiling footprint
• Includes a locking screw for added safety and security

18 in. Black Pre-Cut NPT with Cable Outlet

• A pre-cut pipe with cable routing outlet that connects to any 1.5 in. NPT pipe adapter
• Durable powder-coated aluminum pipe

8 in. Black Pre-Cut NPT with Cable Outlet

• A pre-cut pipe with cable routing outlet that connects to any 1.5 in. NPT pipe adapter
• Durable powder-coated aluminum pipe

Add-on Equipment Shelf to Attach to P-Series

• Daisy-chain A/V equipment and/or computers below flat-panel display
• Attaches to lower equipment shelf (SHLF-EQ)

Single-display Adapter for Carts and Stands

• Can be used with any length support tubes (sold separately) and floor stand/base
• Can be positioned anywhere along the poles and secured with included set screws

10 in. Black Pre-Cut NPT with Cable Holes

• A pre-cut pipe with cable routing outlet that connects to any 1.5 in. NPT pipe adapter
• Durable powder-coated aluminum pipe

4 in. Black Pre-Cut NPT with Cable Outlet

• A pre-cut pipe with cable routing outlet that connects to any 1.5 in. NPT pipe adapter
• Durable powder-coated aluminum pipe

24 in. Black Pre-Cut NPT with Cable Outlet

• A pre-cut pipe with cable routing outlet that connects to any 1.5 in. NPT pipe adapter
• Durable powder-coated aluminum pipe

Projector Mount with False Ceiling Adapter and Quick Lock Cable

• Projector mount features cable routing inside pipe
• Gyrolock™ quick installation connector

Ceiling Adapter with 1.5 in NPT Coupler

• Design with integrated 1.5 in. NPT coupler
• Installs on a solid ceiling surface

36 in. Black Pre-Cut NPT with Cable Outlet

• A pre-cut pipe with cable routing outlet that connects to any 1.5 in. NPT pipe adapter
• Durable powder-coated aluminum pipe

48 in. Black Pre-Cut NPT with Cable Outlet

• A pre-cut pipe with cable routing outlet that connects to any 1.5 in. NPT pipe adapter
• Durable powder-coated aluminum pipe

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for Samsung 400EXn and 400EX

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for Samsung 460DX, 460DX-2, 460DXn, and 460DXn-2

In-wall A/V and Power GearBox™

• Easy installation and placement
• Can install in drywall - No need for dedicated pre-construction stud placement

50 Watt Compact Power Amplifier

• Output 50 watt (25 watts RMS per channel)
• Three stereo line-level inputs with gain control

Floor Stand with 84 in. Dual Poles, Back-to-Back Adapter and Two Tilting Mounts for Flat-Panels up to 175 lb./79 kg

• Mount two flat-panels back-to-back on CTM-MS2 mounts
• Cable management inside poles

Mobile Nesting Cart with 72 in. Chrome Poles

• Nesting base design is ideal for tight storage spaces
• Designed to easily roll through standard doorways

Floor Stand with 60 in. Chrome Poles and Back-To-Back Flat-Panel Mount Adapter

• Mount two or more flat-panels back-to-back
• Adjustable flat-panel placement along poles for perfect viewing height

Lightweight Dual-Pole Floor Stand with 72 in. Chrome Poles

• Lightweight reinforced design
• Ergonomic handles for easy transport

Tilt Mount for Flat-Panel Displays up to 125 lb.

• A simple lift-and-hook design for easy installation
• Built-in lateral shift for post-installation screen adjustments

Lightweight Floor Stand with 72 in. Dual Poles and Fixed Universal Mounting Arms for Flat-Panels up to 160 lb.

• Adjustable flat-panel placement along poles for perfect viewing height
• Base features ergonomic transport handles

Floor Stand with 72 in. Dual Poles and Tilting Mount for Flat-Panels up to 175 lb.

• Flat-panel mount features patented Griplates™ to support and hold display tight on its mounting
  brackets
• Three vertical height mounting options for carts and stands

Universal Projector Mount with Small Extension Column

• Integrated coupler on MAG-PRO attaches to standard 1.5 in. NPT and features cable routing port
• Patented MagnaGuide™ reduces installation time and aids in projector alignment (U.S. Patent No.
  7,758,001 B2)

Universal Projector Mount and False Ceiling Adapter

• Patented MagnaGuide™ reduces installation time and aids in projector alignment (U.S. Patent No.
  7,758,001 B2)
• Radial Glide™ provides smooth roll, pitch and yaw

Low-Profile Tilting Portrait Mount for Flat-Panels up to 175 lb.

• Holds flat-panel in portrait orientation 2 in. from the wall
• 8º of continuous downward tilt

Low-Profile Flat Portrait Mount for Flat-Panels up to 175 lb./80kg

• Holds flat-panel in portrait orientation less than one inch from the wall
• Post-installation leveling system

Wall Equipment Gearbox™

• Patent-pending GearBox™ stores amplifier, PC, Mac mini™ or other control modules
• Optional audio upgrade with UNI-AUD kit

Rotating Mount for Flat-Panels up to 160 lb./73 kg

• Rotates 360° so display can be locked in any position
• Patented Griplates™ (US Patent number 8,035,757 B2) support flat-panel displays and hold the
  display tight on the mounting brackets

Medium Equipment Storage GearBox™

• Holds laptops, digital signage players, switchers and other electronics of similar size with 13.25 x
  11.25 x 3 in. of storage space
• Removable locking lid with three key options

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for NEC LCD5220

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for NEC LCD4020

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for Samsung 460EXn and 460EX

Secure iPad™ Mounting Frame with Access to Home Button and Camera

• Secure frame encloses entire iPad™, but allows access to the camera and home button
• Ventilation openings for airflow are located on the top and bottom of the mount

Extension collars

• Extension collars fit over dual pole adapters to extend the length of the pole
• Chrome poles cannot be extended beyond 84 inch height

Small Equipment Storage GearBox™ for Single Pole Carts and Stands

• Designed to fit the Mac mini™, mini PCs and other small media components with 8 x 8 x 2.63 in. of
  space
• Removable locking lid

Medium Equipment Storage GearBox™ for Dual Pole Carts and Stands

• Holds laptops, digital signage players, switchers and other electronics of similar size with 13.25 x
  11.25 x 3 in. of storage space
• Removable locking lid with three key options

Medium Equipment Storage GearBox™ for Single Pole Carts and Stands

• Holds laptops, digital signage players, switchers and other electronics of similar size with 13.25 x
  11.25 x 3 in. of storage space
• Removable locking lid with three key options

Large Equipment Storage GearBox™ for Single Pole Carts and Stands

• Storage space of 17.88 x 13.71 x 5.35 in.
• Integrated rack rails 3RUs high

Large Equipment Storage GearBox™ for Dual Pole Carts and Stands

• Storage space of 17.88 x 13.71 x 5.35 in.
• Integrated rack rails 3RUs high

1.5 in. NPT Adjustable-Height Pipe Adapter

• Adjusts from 9 - 12 in. (228.6-304.8mm) in 1" increments on a 1.5 in. threaded pipe
• Works with any 1.5" NPT ceiling plate or accessory

1.5 in. NPT Adjustable-Height Pipe Adapter

• Adjusts from 18 - 24 in. (457.2-609.6mm) in 1" increments on a 1.5 in. NPT pipe
• Works with any 1.5" NPT ceiling plate or accessory

1.5 in. NPT Adjustable-Height Pipe Adapter

• Adjusts from 36 - 60 in. (914-1524mm) in 1 in. increments on a 1.5 in. threaded pipe
• Works with any 1.5" NPT ceiling plate or accessory

1.5 in. NPT Adjustable-Height Pipe Adapter

• Adjusts from 48 - 72 in. (1219.2-1828.8mm) in 1 in. increments on a 1.5 in. threaded pipe
• Works with any 1.5" NPT ceiling plate or accessory

15" Single Pole W/ Grommet Base

• Through counter base allows cable and power to be routed through a solid surface
• 15" pole for multimonitor installations

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for NEC X461HB

Back-To-Back Table Mount

• Custom sized for specific flat-panels
• Smooth swivel

Ceiling Adapter with 2 inch Swiveling Coupler

• Ceiling Adapter with 2" Threaded coupling for NPT Pipe
• May be used in conjunction with (AST-2446/2) 2" single-pipe adjustable-height suspension adapter for
  drop distances of more then 3' 10 inches

Floor Stand with 60 in. Black Poles and Back-To-Back Flat-Panel Mount Adapter

• Mount two (or more) flat-panels back-to-back
• Adjustable flat-panel placement along poles for perfect viewing height

Floor Stand with 72 in. Black Poles and Back-To-Back Flat-Panel Mount Adapter

• Mount two (or more) flat-panels back-to-back
• Adjustable flat-panel placement along poles for perfect viewing height

Shelf for PSP Series Floor Stand

• Adapts to Premier Mounts' single pole carts or stands
• Provide extra storage area for stand configuration

Swivel Adapter with 1.5 inch NPT Pipe-to-Coupler Fittings

• Upper and lower locations secured by 8-point, hard-steel bolt and self-locking nut
• Holds up to 275 lbs

Lateral Shift Adapter

• Use in conjunction with PP-FCMA false ceiling adapter for over 8 inches of lateral movement in
  either direction
• Includes Premier Mounts' limited lifetime warranty

VESA Adapter Plate For Panasonic BT-LH2600W

• Dedicated adapter plate for Panasonic displays
• Fits specific mounting patterns for Panasonic LCDs

72 inch Right-Angle Power Cord

• 72 in. low-profile, right angle power cord
• For flat-panel and projector installations

Mobile Nesting Cart with 60 in. Black Poles

• Nesting base design is ideal for tight storage spaces
• Designed to easily roll through standard doorways

Mobile Cart with Dual Poles and Fixed Mount for Side-By-Side Displays up to 175 lb.

• Adjustable flat-panel placement along poles for perfect viewing height
• Includes two locking and two non-locking heavy-duty casters

Lightweight Floor Stand with 72 in. Dual Poles and Tilting Mount for Flat-Panels up to 175 lb.

• Adjustable flat-panel placement along poles for perfect viewing height
• Cable management inside poles

Low-Profile Floor Stand with 72 in. Dual Poles and Tilting Mount for Flat-Panels up to 175 lb.

• Adjustable flat-panel placement along poles for perfect viewing height
• CTM-MS2 features patented Clevis technology for effortless tilt

Low-Profile Floor Stand with 84 in. Dual Poles and Tilting Mount for Flat-Panels up to 175 lb.

• Adjustable flat-panel placement along poles for perfect viewing height
• CTM-MS2 features patented Clevis technology for effortless tilt

Mac mini™ Adapter for CTM, PCM and P-Series Tilt Mounts

• Allows users to support a Mac mini™ on any CTM, PCM or Pro-series Tilt mounts
• Accommodates any Mac mini™ made after June 2010 (Dimensions: 7.4 x 7.8 x 1.6 in.)

Two-way speaker system

• Acoustically balanced 2-way speaker system
• Each speaker includes a 5.25" woofer and directional 1" tweeter

VESA Tilting Mount for Flat-Panels up to 40 inch

• Easy, single-stud installation
• 10° of continuous tilt

Audio Upgrade Kit for UNI Short-Throw Projector Wall Mounts

• Energy-efficient 50 watt compact power amplifier
• Acoustically balanced two-way speaker system includes two speakers, each with a 5.25 in. woofer and
  directional one in. tweeter

Lightweight Floor Stand with 72 in. Dual Poles and Tilting Mount for Flat-Panels up to 175 lb.

• Adjustable flat-panel placement along poles for perfect viewing height
• Cable management inside poles

Secure Storage Shelf for Carts and Stands

• Integrated rack rails, 3RUs high
• Lockable hinged lid

Secure iPad™ Mounting Frame with Access to Home Button

• Secure frame encloses entire iPad™, but allows access to the home button
• Ventilation openings for airflow are located on the top and bottom of the mount

Threaded Pipe (NPT) custom length, 2 inch diameter

• Customer cut to length NPT pipes
• High quality pipe with precision cut thread

Threaded Pipe (NPT) custom length, 1.5 inch diameter

• Customer cut to length NPT pipes
• High quality pipe with precision cut thread

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for Samsung 460FP-2, 460FP-3, and 460FPn-2

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for NEC LCD4620

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for Samsung 400DX, 400DX-2, 400DXn and 400DXn-2

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for Samsung 460UX, 460UX-2, 460UXn, 460UXn-2 and KORTEK 46

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for NEC P461 and P461-AVT

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for NEC P521 and P521-AVT

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for NEC P401 and P401-AVT

1.5 in. NPT Adjustable-Height Pipe Adapter

• Adjusts from 6 - 9 in. (152.4-228.6mm) in 1 in. increments on a 1.5 in. threaded pipe
• Works with any 1.5" NPT ceiling plate or accessory

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for NEC P551 and P551-AVT

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for the Sharp PN-E421

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for the Sharp PN-E471R

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for the Sharp PN-V601

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for the Sharp PN-L601B

Installation Hardware Pack

• Includes Phillips pan heads, security head screws, lag bolts and in-wall anchors
• A depth measuring straw, washers, spacers, allen keys and a level are also included in the pack for
  your convenience.

Lightweight Dual-Pole Floor Stand with 60 in. Chrome Poles

• Lightweight reinforced design
• Ergonomic transport handles

Header Bar for MVWS-2x2-4655

• Works with 2x2 modular video wall stand configuration with 46" and 55" displays
• Attach to the video wall stand and suspend from ceiling with cables (not included)

VESA Adapter Plate - 400x400mm and 400x600mm

• Fits mounts with 100x100mm mounting pattern
• Extends a 100x100mm pattern to a 400x400mm or 400x600mm pattern

Modular Video Wall for 55 inch Flat-Panels

• Layout options in portrait or landscape orientation
• Includes mounting hardware pack

Vibration Reducing Adapter

• Inner rubber dampers absorb vibrations near the mount
• Integrated coupler adapts to 1.5” NPT pipe

2 in. Column to 1.5 in. NPT Adapter

• Product only sold in Europe
• 2 in. column adapter for 1.5 in. NPT

Universal Sound Bar and Camera Shelf

• Attatches to ECM ceiling mounts and P-series mounts
• Ample space within the attachment adapter for routing power and cables

Mobile Nesting Cart with 72 in. Black Poles

• Nesting base design is ideal for tight storage spaces
• Designed to easily roll through standard doorways

Low-Profile Single-Pole Floor Stand with 60 in. Black Pole

• Low-profile base (0.25 in.) can easily slide under carpet for a seamless look
• Adjustable flat-panel placement along pole for perfect viewing height

Low-Profile Single-Pole Floor Stand with 72 in. Chrome Pole

• Low-profile base (0.25 in.) can easily slide under carpet for a seamless look
• Adjustable flat-panel placement along pole for perfect viewing height

Low-Profile Single-Pole Floor Stand with 84 in. Black Pole

• Low-profile base (0.25") can easily slide under carpet for a seamless look
• Adjustable flat-panel placement along pole for perfect viewing height

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for the LG M4224C-BA, M4224CCBH, M4225CCBA

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for the Sharp PN-E601

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for the Sharp PN-E521

Elliptical Floor Stand Base with PSD-SPA Mount Adapter

• PSD-SPA single display adapter features 4.5 in. bolt pattern for attaching flat-panels
• Elliptical floor stand can be used as a static stand or mobile display

Model-Specific Video Wall Spacer

• Model specific flat-panel spacers dramatically cut down on time and frustration of large matrix
  video-wall installations
• Designed specifically for LG M4210LCBA, M4212T-BA, M4213CCBA, M4214CCBA

Lightweight Dual-Pole Floor Stand Base with PSD-SPA Mount Adapter

• Lightweight, reinforced design
• Ergonomic transport handles

Quick Release for UFA Mounting Arms

• Accommodates dual pole carts and stands with 2 in. openings
• Arms swivel left to right 15 degrees

Modular Video Wall on Dual Pole Stand Configuration

• Multiple units can be mounted side by side or in rows to create a video wall array
• Layout options in portrait or landscape orientation

Tilting Flat-Panel Cable Mount

• VESA compatible from 200 x 200 to 600 x 400 mm
• Mount plate is easily installed with the patented MagnaGuide™ feature

Video Wall Framing System for Flat-Panels in Portrait Orientation

• Shared component parts across product line reduces cost and training time and optimizes labor
  efficiency
• Single latch design and smaller base frame size provide quick and easy installation

Dual Pole Cart Base with Nesting Capability and PSD-SPA Mount Adapter

• Works with T60, T72, and T84 poles (not included)
• Nesting base design is ideal for tight storage spaces

Shelf for PSD Series Floor Stand

• Lightweight design with easy install
• Provide extra storage area for stand configuration

Low-Profile Single Pole Floor Stand with VPM VESA Mount

• Low-profile, black floor stand
• For use with single pole (P60, P72, P84)

3x4 MicroTiles® Configuration with Elliptical Cart Stand

• Elliptical floor stand can be used for a static stand or mobile cart display
• Three (3) MicroTiles® can be pre-installed to each MTM-3000 bracket then raised altogether onto the
  dual pole cart or stand

Ceiling Joist Spanner with 1.5 inch NPT Receptacle

• Knockouts allow electrical boxes to be mounted inside adapter.
• Installs between two wood studs (16 inch on center) or along a single stud

Adjustable Mobile Stand for iPad™

• Free standing reversible iPad™ stand
• Easy to attach and detach the device

Universal Fixed Dual-Pole Mount for Multiple Flat-Panel Display up to 160 lb

• Holds up to two 55" panels depending upon mounting patterns
• Works with dual-pole carts and stands

3x4 MicroTiles® Configuration with Lightweight Dual-Pole Floor Stand

• Base stand includes ergonomic transport handles with lightweight, reinforced design
• Three (3) MicroTiles® can be pre-installed to each MTM-3000 bracket then raised altogether onto the
  dual pole cart or stand

VESA Adapter Plate - 400mmx200mm

• Adapter plate extends a 100x100mm pattern to a 400x200mm pattern
• Fits mounts with 100x100 mounting pattern

Header Bar for MVWS-3x3-46

• Works with 3x3 modular video wall stand configuration with 46" displays
• Attach to the video wall stand and suspend from ceiling with cables (not included)